banner



AMD Tonga GPU Gets First Die Shot, Features a 384-bit Memory Controller - Fiji Die Size Approximated at 560mm2

The starting time dice shot of AMD's Tonga GPU was shown during the Carrizo APU presentation which gives united states of america a hint at a few interesting details. Analyzed by the forum members at Beyond3D, the die shot shows that Tonga GPU has a 384-fleck retention controller on the total chip. The other details included in the postal service testify an approximation of the Fiji GPU die which is much larger than Hawaii'south 438mm2.

Prototype Credits: PCGamesHardware

AMD Tonga GPU Die Shot and Fiji GPU Size Analyzed - 384-scrap Controller and Largest GPU AMD Always Created

The Tonga GPU has been function of the GCN family since a while. It was introduced in the Radeon R9 285 graphics card which was launched a few days before the Maxwell GM204 based GeForce 900 series parts. The Radeon R9 285 feature the Tonga Pro bit which had 1792 stream processors within its 28 CU core design and had a 256-bit bus opposed to the 384-bit bus which was featured on Tahiti. AMD justified that the 256-bit bus was enough due to the color pinch characteristic on Tonga which was meant to enhance memory bandwidth efficiency by allowing the GPU to utilise the available bandwidth more efficiently hence reducing any imminent clogging. The second chip to make utilise of the Tonga core architecture was the Radeon R9 M295X. A mobile scrap fabricated exclusively for Apple'due south 5K iMac and featured 2048 stream processors alongside a 256-bit retentivity bus which happened to have 4 GB GDDR5 VRAM.

Both chips had the latest iteration of GCN architecture that enabled new technologies which previously weren't supported on AMD cards. This led many to label the Tonga GPU as the GCN 1.2 iteration while the GCN 1.i are the Hawaii and Bonaire based cards. AMD was speculated to launch the Radeon R9 285X with a full Tonga GPU just those plans were cancelled subsequently the Maxwell launch which featured meliorate performance than Tonga had to offering.

Subsequently half a yr worth of wait, we might finally exist looking at Tonga in two cards. The first 1 will be rebrands of the Radeon R9 285 and placed in the Radeon R9 380 series. The second ane will be the Radeon R9 380X carte du jour that will house the full Tonga XT variant with 2048 stream processors, 128 TMUs and 32 ROPs. The interesting role is that, in comparison to the R9 380 that features a 256-bit passenger vehicle, the R9 380X volition get a 384-bit bus as seen in the die shot posted in the latest Carrizo presentation. The bit shot shows six 64-scrap memory controllers that confirm a 384-fleck omnibus interface and volition most probable incorporate three GB of VRAM every bit opposed to 2 GB VRAM on the Radeon R9 285 (four GB custom variants).

AMD Tonga Based Radeon 300 Series Cards Specifications "Predicted":

AMD Radeon R9 380 AMD Radeon R9 380X AMD Radeon R9 390 AMD Radeon R9 390X
GPU Name Antigua Pro Antigua XT Hawaii Pro Hawaii XT
Die Size 359mm² 359mm² 438mm² 438mm²
Compute Units 28 32 sixty 64
Stream Processors 1792 2048 2560 2816
ROPs 32 32 forty 44
TMUs 112 128 160 176
Clock Speed 970 MHz 1000 MHz grand MHz 1050 MHz
Texture Fill Rate 108.64 GT/southward 124.26 GT/s 160.0 GT/due south 184.viii GT/s
Height Compute (FP32) iii.48 TFLOPs 3.97 TFLOPs five.one TFLOPs five.9 TFLOPs
VRAM 2 - 4 GB GDDR5 4 GB GDDR5 viii GB GDDR5 8 GB GDDR5
Retentivity Clock 5.5 - 5.seven GHz 5.vii GHz 6.0 GHz 6.0 GHz
Memory Omnibus 256-chip 256-chip 512-bit 512-bit
Bandwidth 176.2 / 182.4 GB/south 182.four GB/southward 384 GB/s 384 GB/s
TDP 190W 190W 275W 275W
Launch Cost $199 Usa $229 US $329 $429

AMD Fiji GPU Die Measures Around 560mm2 - Launch Nearing

The other news is that we are close to an judge dice size of the Hawaii GPU. Aforementioned guys at Beyond3D were able to become a number shut to 560mm2 for the Republic of the fiji islands GPU which confirms that this is the largest GPU that AMD has ever created. NVIDIA's largest, the 601mm2 GM200 has already shown how far tin can NVIDIA stretch their muscles on the 28nm procedure and AMD is doing the same with a very high-performance chip geared towards high-finish enthusiasts. We know that the graphics card was shown backside airtight doors at Computex. Sapphire was ane of the AIBs showing the cards along with several other AIBs who had shown them to select press members. The launch of the carte is slated at 16th June where AMD volition concur a printing conference at E3.

AMD Fiji GPU Chip Return:

AMD Fiji GPU Die Shot

Source: https://wccftech.com/amd-tonga-gpu-die-shot-features-384bit-memory-controller-fiji-die-size-approximated-560mm2/

Posted by: pritchardtrieste.blogspot.com

0 Response to "AMD Tonga GPU Gets First Die Shot, Features a 384-bit Memory Controller - Fiji Die Size Approximated at 560mm2"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel